Optimization of carrier-mediated three-phase hollow fiber microextraction combined with HPLC-UV for determination of propylthiouracil in biological samples.

Carrier-mediated three-phase hollow fiber microextraction combined with high-performance liquid chromatography-ultra violet detection (HPLC-UV) was applied for the extraction and determination of propylthiouracil in biological samples. Propylthiouracil (PTU) was extracted from 7.5 mL of the basic solution (the source phase) with pH 12 into an organic phase (n-octanol containing 6% (w/v) of Aliquat 336 as the carrier) impregnated in the pores of a hollow fiber, and finally was back extracted into 24 µL of the acidic solution located inside the lumen of the hollow fiber (the receiving phase). The extraction was performed through the gradient of counter ion from the source to the receiving phase. The effects of different variables on the extraction efficiency were studied simultaneously using an experimental design. A half-fractional factorial design was employed for screening to determine the variables significantly affecting the extraction efficiency. Then, the factors with significant effect were optimized using a central composite design (CCD) and the response surface equations were developed. The optimal experimental conditions obtained from this statistical evaluation included: source phase, pH 12; temperature, 25°C; extraction time, 40 min; counter ion concentration, 2 mol L(-1) of NaClO(4); organic solvent 6% of Aliquat in octanol and without salt addition in the source phase. Under the optimized conditions, the preconcentration factors were between 125 and 198 and also the limit of detections (LODs) ranged from 0.1 µg L(-1) to 0.4 µg L(-1) in different biological samples. The calibration curve was linear (r(2)=0.998) in the concentration range of 0.5-1000 µg L(-1). Finally, the feasibility of the proposed method was successfully confirmed by extraction and determination of PTU in human plasma and urine as well as the bovine milk and meat samples in microgram per liter, and suitable results were obtained (RSDs<6.3%).

Simultaneous determination of thyreostatic residues in animal tissues by matrix solid-phase dispersion and gas chromatography-mass spectrometry.

A method for determination of thyreostatic residues in animal tissues by matrix solid-phase dispersion (MSPD) and gas chromatography-mass spectrometry in selected ion detection mode was developed. Thyreostatic compounds in different matrices were extracted and purified by combination of MSPD and subsequent solid-phase extraction. Silica gel was selected as the solid support of both procedures and the conditions of the procedures were optimized. Thyreostats were derivatized with pentafluorobenzylbromide (PFBBr) in strong basic medium and then with N-methyl-N-(trimethylsilyl)-trifluoroacetamide (MSTFA), which can improve the yields of derivatization for thyreostats, the repeatability, and therefore the limits of detection (LOD) of thyreostats. The limits of detection reached 10 microg/kg (2-thiouracil, 6-methyl-2-thiouracil and 6-propyl-2-thiouracil), 20 microg/kg (6-phenyl-2-thiouracil) and 50 microg/kg (tapazole) with high recoveries (more than 70% for most of thyreostats) and relative standard deviations between 4.5% and 8.7%.

Application of capillary zone electrophoresis for analysis of thyreostatics.

Capillary zone electrophoresis was optimized for the separation of thiouracil, methylthiouracil and propylthiouracil. Methylthiouracil could be determined in various types of urine (human, bovine, horse), either without any pretreatment or in ethyl acetate extracts, within 15 min. For identification, the simultaneous detection at three UV wavelengths (216, 245 and 278 nm) was advantageously used while for quantification the wavelength of the absorbance maximum at 278 nm was preferred. Under optimized conditions a linear response of the detector in the concentration range 0.1-100 ppm was obtained. On analysis of untreated urine, a detection limit of 0.5 ppm was found; for urine extracts the detection limit was 0.1 ppm. Univocal peak identification, based on absorption at three wavelength, was only possible above 2 ppm. Relative standard deviation for standard solutions of methylthiouracil, diluted in the background electrolyte, was 1%; for methylthiouracil in extracts dissolved in the background electrolyte it was 4.5%, and for methylthiouracil in untreated urine, 12.7%.